Yamaha Wolverine YX70EPNG Service Manual page 103

1. Wire harness
2. Tail/brake light lead (left)
3. Final drive assembly breather hose
4. Tail/brake light lead (right)
A. Fasten the wire harness with the holder.
B. Place the slack in the tail/brake light lead in the
area shown in the illustration.
C. Fasten the tail/brake light lead with the plastic
band.
D. Fasten the tail/brake light lead (right) with the
holder.
E. Fasten the final drive assembly breather hose with
the holder.
2-70
CABLE ROUTING