How To Set The Position Of Layer Image - RGBlink VSP3500 User Manual

6. System Setup and Operations

How to set the position of layer image?

How to set the position of layer image?
Firstly, ensure the equipment is on power and run normally. For details,
please refer to:
Button operation is as follows:
1. In CUSTOM ADJUSTMENTS area, press 【Position】 key, key lights,
and start the set the position of layer image function;
2. In LAYER area, press any bright key of A, B, C, D (keys light are
optional), key lights, and it can be edited;
3. Rotate left/right knob to adjust window level position, and rotate
up/down knob to adjust window vertical position;
4. LCD screen displays the value;
5. Press 【Position】 key again, key lights is off and close the set the
position of layer image function.
VSP 3500
How to determine equipment run normally?
POS X:
POS Y:
User Manual
0
0
93