Pst Mode; Signal Selection; Add Or Delete Layer; Freeze The Layer - RGBlink CP 3072PRO User Manual

3.4 PST Mode

CP 3072PRO supports 2 HDMI preview output, and it supports the functions as below:

3.4.1 Signal Selection

Push any button in Input Sources Area, for example, push the button [5], the border of signal 5
will change to yellow, and the signal in PGM monitor will be changed to signal 5.

3.4.2 Add or Delete Layer

Push any button of [A] to [D] in Layer Selection Area to add or delete the layer.
Add layer: The light is lit.
Select layer: The light is flashing.
Delete layer: The light is off.

3.4.3 Freeze the Layer

Push the [FREEZE] button in Layer Adjustment Area, the layer will be freeze, push the button
again, the layer is live.

3.4.4 Multiview Presets

1. Push any button in Multiview Presets Area to select multiview layouts, including 1P, PIP CENT,
and 3P.
2. User can adjust the position, size for the selected layer, and set DSK, BLEND and MASK.

3.4.5 Set the Position

1. Push any button of [A] to [D] in Layer Selection Area, the light is flashing when the layer is
selected.
2. Push the [POS] button in Layer Adjustment Area, and enter to the menus as follows:
->H Pos
Use the rotary knob or joystick to adjust the position of the layer.
CP 3072PRO
V Pos
Reset
User Manual
Chapter 3: Using Your Product
120
329
>>
27