Connect Output Source; Connect Control Computer - RGBlink Q2 Quick Start Manual

Connect Output Source

Q2 Series supports SDI,DVI,HDMI,HDBaseT and other optional output modules.
Connect Q2-4 with monitors.

Connect control Computer

Q2 series is operated by XPOSE,so it is necessary to connect device with control computer.
Method 1:Direct Connection:Connect Q2-4 with computer via network cable as shown in the figure below.It is
suitable for single user to control the device.
Method 2：Router Connection:Connect control computer and Q2-4 with Router as shown in the figure below.It
supports simultaneous online operation by multiple users.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 |
support@rgblink.com
|
www.rgblink.com
10 / 30