Connect Output Source
Q16pro Series supports SDI,DVI,HDMI,HDBaseT and other optional output modules.
Connect Q16pro with monitors.
Connect Control Computer
Q16pro series is operated by XPOSE,so it is necessary to connect device with control computer.
Direct Connection: Connect Q16pro with computer via network cable as shown in the figure below. It is suitable
for single user to control the device.
Router/Switch Connection: Connect control computer and Q16pro with Router or Switch. It supports
simultaneous online operation by multiple users.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.com
Control Computer
Control Computer
Router
5