Battery Indicator; Squeegee Assembly - COMAC SIMPLA 55BT Use And Maintenance Manual

ATTENTION: danger of exhalation of gas and leakage of corrosive liquids
ATTENTION: danger of fire: do not go near with free flames

13. BATTERY INDICATOR

On the instrument panel of the machine there is a monitor (1) indicating (amongst other things) the
battery charge status. If the upper line contains 8 light indicators, the battery charge level is 100%. If
the edges of the indicators are flashing, this means the batteries are run down.
ATTENTION: a few seconds after the last indicator on the monitor has flashed,
the brush motor will automatically switch off. With the remaining charge it is
possible to complete the drying process before recharging

14. SQUEEGEE ASSEMBLY

For packaging reasons, the squeegee is supplied disassembled from the machine, and must be
assembled on the machine connection. The squeegee connection must be lifted by means of the lever
at the rear of the machine and the following procedure carried out:
1. Verify that the main switch of the machine is in the "0" position, if not do so, for the electric versions
make sure the power supply is disconnected
2. Raise the squeegee and insert the small left-hand column (1) in the connection hole
3. push the connection lever (2) to the left
4. Raise the squeegee and insert the small right-hand column (3) in the connection hole
5. Release the connection lever (2) so it is blocked in the flat housing of the small column
6. Insert the suction tube (4) in the appropriate squeegee sleeve (5), ensuring that the tube lies to the
right of the lifting cable
ATTENTION: these operations must be carried out using protective gloves to
avoid any possible contact with the edges or tips of metal objects
MACHINE PREPARATION
14
1
5
4
2