Figure 77 Native Fibre Channel Drive Configuration; Figure 78 Configured Topology Help Screen - Quantum px720 User Manual

Figure 77 Native Fibre
Channel Drive Configuration
Figure 78 Configured Topology
Help Screen
Quantum PX720 User's Guide
Channel tape drives are installed in the library, a link for Fibre appears in
the connectivity type column that displays the drive configuration.
To configure native Fibre Channel tape drive:
1 Under the
Drives
The
Drive Configuration
2 Select the
Configured Topology
) from the drop down box. If you click the
Fabric
following
Configured Topology Help
Chapter 3 Quantum PX720 Remote Management
page, click in the connectivity column.
Fibre
screen displays (see
( ,
Loop Fabric
screen displays (see
Setup
figure 77).
, , or
Public Loop Auto
link the
Help
figure 78).
131