Quantum Px720 User's Guide - Quantum px720 User Manual

Quantum PX720 User's Guide

Refresh Tape Alert Data
The tape alerts data is generated and stored internally for quick reporting
and viewing. If the data files do not exist (i.e. factory default), they will be
generated automatically. To update the files, click
Display Filters
Barcodes and/or drives no longer in the library can be excluded from the
tape alerts listing by unchecking the appropriate checkbox. Also, the user
can select whether to display tape alerts from the last 1 or 24 hours; or 7,
14, 30, or 60 days only.
Tape Alert Flags
The section lists all tape alerts that have been detected in
Tape Alert Flags
the system along with total occurrences and when it last occurred. To
view details of a tape alert, including which drive and barcode the tape
alert was detect in, click the
Barcode with Tape Alert Flags
The
Barcode with Tape Alert Flags
a tape alert detected. A total alerts count and last occurrence for each
cartridge is also displayed. To view details of a cartridge's tape alert data,
including which drive and tape alert was detected with, click the
Barcode's View Details
An asterisk '*' after the barcode indicates the cartridge is no
Note:
longer in the library.
Drives with Tape Alert Flags
The
Drives with Tape Alert Flags
alert detected. A total alerts count and last occurrence for each drive is
also displayed. To view details of a particular drive's tape alert data,
including which tape alert flag and barcode association, click the
.
View Details
Chapter 3 Quantum PX720 Remote Management
Alert Flag's View Details
section lists all tape cartridges that have
.
section lists all drives that have a tape
Status
.
Refresh
.
Drive
105
3
3
3
3
3