Figure 95 Create Secure Key Name/Secure Key Pair - Quantum px720 User Manual

Figure 95 Create Secure Key
Name/Secure Key Pair
Quantum PX720 User's Guide
To create a secure key name/secure key pair:
1 Enter the
Secure Key Name
The secure key name must be less than 12 characters, may
Note:
include spaces, but cannot contain the following
characters: ( ) = ;
2 Enter a securekey in the protected
3 Enter the same secure key in the
Note: The Secure Key must be at least 8 characters and no more
than 32 characters.
4 Click to create the secure key name/key pair.
New
Delete Secure Key Name
Refer to figure 96 for information on
Chapter 3 Quantum PX720 Remote Management
.
Secure Key
Verify Secure Key
Delete Secure Key Name
Setup
field.
field.
.
161
3