Figure 68 Move Page - Quantum px720 User Manual

Figure 68 Move Page

Move cartridge
Source
Destination
Quantum PX720 User's Guide
To move a cartridge:
1 Select a source cabinet (or partition), source element (slot, port, drive,
or address), and enter a starting position and count. If the count field
is left empty, only the starting cartridge is moved.
Note: The
Physical Map
from the library gripper or CLM gripper. The
allows you to move a tape cartridge across partitions. A
confirmation message prompts before proceeding with the
move.
2 Select a destination cabinet (or partition), element, and position. If
more than one cartridge is moved, the position entered in as a
destination is the first one filled, consecutive elements must be
empty.
Caution: Use care when moving cartridges from the physical
view on a partitioned library. It is possible to move
cartridges across partitions without a confirmation
message.
Chapter 3 Quantum PX720 Remote Management
allows you to move tape cartridges to or
Operations
Logical Map
117