Figure 17 Tape Drives And Robotics Controller - Quantum px720 User Manual

Figure 17 Tape Drives and
Robotics Controller
Quantum PX720 User's Guide
2 Route a SCSI cable up through the base of the library on the right-
hand side and connect the host computer to the robotics controller or
include the robotics controller with two tape drives (see
3 Connect the host computers to the tape drives by routing SCSI cables
up through the base of the library and along the right-hand side of
the cabinet (see figure
Tech Tip: Start cabling with drive cluster 0 at the top of the
library and work down.
Chapter 1 Library Description
Tape drive numbering
Drive B (1)
Drive D (3)
Cluster 0, tape drives 0 through 3
Cluster 1, tape drives 4 through 7
Cluster 2, tape drives 8 through 11
Cluster 3, tape drives 12 through 15
Cluster 4, tape drives 16 through 19
SCSI HBA
18).
Getting Started
Drive A (0)
Drive C (2)
figure 17).
32