Page 2
Every effort has been made to ensure that the information in Oki is a registered trademark of Oki Electric Industry Company this document is complete, accurate, and up-to-date. Oki Ltd. assumes no responsibility for the results of errors beyond its...
Safety Instructions Your Oki printer has been carefully designed to give you years • Be certain that your power source matches the rating listed of safe, reliable performance. As with all electrical equipment, on the back of the printer. If you are not sure, check with however, there are a few basic precautions you should take to your dealer or with your local power company.
Important Wiring Instructions • Aside from the routine maintenance described in this Wires in the power cable are coloured in accordance with the handbook, do not try to service the printer yourself; following code: opening the cover may expose you to shocks or other Green and Yellow —...
• Paper weight – 60 to 120g/m² • Standard manual feed for card stock, envelopes, transparencies, etc. • Works with recycled paper • Duty Cycle – up to 6,000 pages per month • Printer life – 180,000 pages or five years OKIPAGE 10ex, 12i/n...
After unpacking the printer and choosing a suitable place to put it, check that you have all the necessary parts to continue: 1. Printer 2. Oki Type 5 Image drum cartridge (already installed) 3. Oki Type 5 Toner cartridge 4. Power cable 5.
Rear paper exit tray Top paper exit bin Manual feed tray Power switch Automatic paper feed tray Power cable receptacle LED array Image drum cartridge with toner installed 10BaseT network card (OKIPAGE 12i/n) Bi-directional parallel interface port OKIPAGE 10ex, 12i/n...
Setting Up Your Printer The first time you open the top cover will be to install your first toner cartridge. At this time the power will be off and the printer Before connecting the printer to your PC and mains outlet, cold.
Installing Toner Do not remove cartridge from packaging. Use OKI Type 5 image drum and toner cartridges only. 1. Remove the sponge and discard. 3. Unwrap the new cartridge. 2. Shake the toner cartridge to evenly distribute toner. 4. Carefully peel off the sealing tape.
Page 11
5. Insert the cartridge into the printer, left end first as 7. Close the printer cover. illustrated. 6. Push the coloured tab forward to release the toner into the toner hopper. Setup Guide...
4. Replace the tray in the printer. The paper level indicator are using by lifting up and sliding forwards or backwards (3) provides a visual indication of how much paper is as necessary. left in the tray. OKIPAGE 10ex, 12i/n...
Connecting Your Printer 2. Plug the power cable into the printer, then into a grounded Make sure your printer is not plugged in and your outlet. computer is turned off. 1. Plug the interface cable into the parallel socket on the printer.
The choice of drivers may include PCL, PCL5e, PCL6, PCL-XL, PostScript or Hiper-W (Oki High Performance driver for Windows), depending on the capabilities of your printer. Insert the CD supplied with your printer in your CDROM drive.
Changing the Language Creating Sample Printouts Demo Page To change the printer's display language to your local language proceed as follows: Press the button so that the display reads ON-LINE Press ON LINE (Ready light off). OFF-LINE. Press and hold MENU 1/Menu 2, PRINT MODE appears in Press the FORM FEED/Print Demo button for two seconds.
Need help?
Do you have a question about the OKIPAGE 10ex and is the answer not in the manual?
Questions and answers