General - Extron electronics in1606 User Manual

General

Supported HDMI specification features — Includes data rates up to 6.75 Gbps,
•
Deep Color, and HD lossless audio formats
• HDCP-compliant — Fully supports HDCP-encrypted sources, with selectable
authorization for unencrypted content.
• HDCP authentication and signal presence confirmation — Provides real-time
verification of HDCP status for each digital video input and output. This allows for
simple, quick, and easy signal and HDCP verification through front panel LEDs,
RS-232, USB, or Ethernet, providing valuable feedback to a system operator or
helpdesk support staff.
• HDCP Visual Confirmation — Sends a full-screen green signal when
HDCP-encrypted content is transmitted to a non-HDCP compliant display, providing
immediate visual confirmation that protected content cannot be viewed on the display.
• Key Minder — Authenticates and maintains continuous HDCP encryption between
input and output devices to ensure quick and reliable switching in professional AV
environments, while enabling simultaneous distribution of a single source signal to one
or more displays.
Advanced scaling engine — Scales inputs to a common high resolution output with
•
30-bit processing and 1080i deinterlacing.
• EDID Minder — Ensures that all sources power up properly and reliably output content
for display.
• SpeedSwitch Technology — Provides exceptional switching speed for
HDCP-encrypted content.
• Aspect ratio control — Controls the aspect ratio by selecting a Fill mode, which
provides a full screen output, or a Follow mode, which preserves the original aspect
ratio of the input signal.
• Image freeze control — Freezes a live image.
• Auto-Image — Automatically detects the resolution of the incoming video signal.
This can save time and effort in setting up a newly connected source, particularly in
presentation environments where the input is not connected to a fixed source, but
instead goes to an open connection for a presenter's laptop.
• Auto Input Memory — Automatically stores size, position, and picture settings based
on the incoming signal. When the same signal is detected again, these image settings
are automatically recalled from memory.
• On-screen menus — Allows for easy system setup using the front panel controls. Key
parameters such as input and output video formats and resolutions are conveniently
grouped on the initial Quick Setup screen, while additional screens provide full control
over the unit's other functions and settings.
Output Standby Mode — Mutes video and sync output to the display device when
•
no active input signal is detected. This allows the projector or flat-panel display to
automatically enter into standby mode to save energy and enhance lamp or panel life.
Power Save Mode — Conserves energy when not in use.
•
• Picture controls — Includes controls for brightness, contrast, color, tint, and detail, as
well as horizontal and vertical positioning, and sizing.
Automatic 3:2 and 2:2 pulldown detection — Helps maximize image detail and
•
sharpness for NTSC, PAL, and HDTV 1080i sources that originated from film.
Quad standard, 3D composite video decoding — Provides advanced decoding
•
of composite NTSC 3.58, NTSC 4.43, PAL, and SECAM for integration into systems
worldwide using a temporal, 3D adaptive comb filter.
IN1606 Scaling Presentation Switcher • Introduction 5