Device Commands - Extron electronics in1606 User Manual

Command

Device Commands

On-screen input "bug" time-out
Set OSD bug time-out
View time-out
NOTE: Setting the time-out to
disables the OSD bug.
0
Reset
Erase user-supplied
Web pages and files
24 28
Erase current directory
and files
24 28
Erase current directory
and subdirectories
24 28
Erase flash memory
24
Reset all device settings
to factory default
24
Absolute system
reset (includes
24
setting DHCP: off; IP
192.168.254.254)
Absolute system reset
24
(retain IP)
E
NOTE: The reset
ZY
IP address, unit name, DHCP setting, and port mapping (telnet, web, or direct access) in order to maintain
communications with the device. This reset is recommended after a firmware update.
NOTES:
X2#
= On-screen display bug time-out
ASCII Command
(host to scaler)
E X2# }
MDUR
E }
MDUR
permanently displays the OSD bug (never times out). Setting the time-out to
501
E }
filenameEF
E }
/EF
E }
//EF
E }
ZFFF
E }
ZXXX
E }
ZQQQ
E }
ZY
is similar to , but excludes IP settings such as IP address, subnet mask, gateway
ZQQQ
IN1606 Scaling Presentation Switcher • SIS Communication and Control
Response Additional Description
(scaler to host)
X2#] Set the OSD time-out duration to
Mdur
X2#
X2#] View the OSD time-out duration.
Delete imported Web pages and
]
•
Del filename
files.
] Delete the current directory and
Ddl
files.
] Delete the current directory and
Ddl
subdirectories.
] Clear the flash memory.
Zpf
] Reset all device settings to
Zpx
factory default.
] Reset all device settings,
Zpq
including DHCP and IP settings.
Reset all device settings,
]
Zpy
excluding IP settings.
= OSD bug is never displayed
0
(in 1 second increments)
1-500
= OSD never times out
501
seconds.
42