Creating A Password To Your Call Log; Changing Your Call Log Password - Nortel Modular ICS 4.0 Manual

6. Lift the receiver. (This is not necessary if Handsfree is
programmed at your telephone.) The displayed number is
dialed.

Creating a password to your Call Log

ƒ•°fi
To access your Call Log through a password:
1. Press
New passwrd:.
2. Enter your four-digit password. The display reads
Repeat New:.
3. Re-enter your four-digit password. The display reads
Password changed, which confirms that your password
has been assigned.
ƒ°⁄¤
To enter Call Log using your password:
1. Press
programmed a password, the display reads Password:.
2. Enter your four-digit password.
If you forget your Call Log password, it can be deleted in
programming. See "Using passwords" on page 171.

Changing your Call Log password

ƒ•°fi
1. Press
Old passwrd:.
2. Enter your old password. The display reads
New passwrd:.
3. Enter your new four-digit password. The display reads
Repeat New:.
P0881591 Issue 01
Tracking your incoming calls / 111
ƒ•°fi
. The displays reads
to enter Call Log. If you have
ƒ•°fi
. The display reads
Modular ICS 4.0 System Coordinator Guide