Nortel Modular ICS 4.0 Manual page 31

Use prime line
CHANGE
If you assign a specific line to a system speed dial number, only telephones with
an appearance of that line can use the speed dial number.
Choose what shows up on the display
Use prime line
CHANGE
Display digits:Y
CHANGE
Display digits:N
CHANGE
Program a name for a speed dial
The system has a standard name to display, so it is not necessary for you to
program one. However, if you have chosen not to display the telephone number,
you may want a specific name.
Display digits:N
CHANGE
Name:Sys Spd Di...
CHANGE
...al 01 ...
CHANGE
Name:___
Press the telephone's numeric dial pad button that has the first letter of the
name until the display shows the letter you want.
Name:S
BKSP
P0881591 Issue 01
Frequently used programming operations / 19
In this example, the system selects the prime line
automatically (the most common choice), to dial
speed dial code 01.
'
Press
Your choices are Yes and No. Yes means the display
shows the telephone number. Press CHANGE.
No means the display shows a name for the code.
'
Press
≠
Press
This is the name the display shows if you don't
change it. Press CHANGE.
Decide the name you want to give to the speed dial
-->
code.
Press -->.
-->
.
.
.
Modular ICS 4.0 System Coordinator Guide