Using Voice Call; Making A Voice Call - Nortel Modular ICS 4.0 Manual

104 / Communicating in the office
Messages & Calls
MSG
No button free
No number stored
Start of list
NEXT
Their list full
Your list full
For other displays, see "Common feature displays" on page 203.

Using Voice Call

You can make an announcement or begin a conversation
through the speaker of another telephone in the system.
Tip -
buttons have no appearances for voice calls, and the set
does not ring for voice calls. For more information on Hunt
Groups see "Programming Hunt Groups" on page 135.
For more information on Answer buttons see "Answer
buttons" on page 40.
ƒflfl

Making a Voice Call

Press
Modular ICS 4.0 System Coordinator Guide
You have one or more messages and one or
ƒ°‚fl
CALLS more new Call Logs. Press
the display to the current time and date.
You have no line button free with which to
reply to a message.
There has been no number programmed for
the voice message center. Contact your
voice messaging service provider.
You are at the beginning of your list of
messages. Press NEXT to move through your
messages.
You are trying to send a message to a user
whose message waiting list is full.
You have tried to send a message but your
telephone's list of sent messages is full.
Cancel one of the messages you have sent,
if possible, or wait until you have received a
reply to one of those messages.
Hunt Groups cannot accept voice calls. Answer
.
to change the first line of
ƒflfl
P0881591 Issue 01