Making A Telephone A Hotline Telephone - Nortel Modular ICS 4.0 Manual

Making a telephone a hotline telephone

You can set up a telephone as a hotline.
Tip -
telephone. For more information on Hunt Groups see
"Programming Hunt Groups" on page 135.
You need the programming template found at the front of this
guide. See "Getting started with Norstar" on page 1 for more
ƒ••¤flfl‹››
information.
¤‹fl›fl
1. Press
2. Press
≠
password).
3. Press
4. Enter the internal number of the telephone you want to
program and press
≠
Capabilities.
'
5. Press
6. Press
7. Press CHANGE to select the type of call the hotline makes:
None, Intrnl, or Extrnl.
Internl assigns an internal number.
External assigns an external number. If you select an external
number, you can select the line on which the call is made: the
prime line, an external line, a line in a line pool, or a line
selected by the routing table. If you select a line pool, you must
specify the line pool access code. If you select the routing
table, the number dialed is treated as a destination code and is
routed according to the routing tables.
P0881591 Issue 01
A Hunt Group set DN can be specified as a Hotline
(the default System Coordinator
at Terminals&Sets.
≠
.
until the display reads Hotline.
Using System features / 177
.
. The display reads
Modular ICS 4.0 System Coordinator Guide