Changing Set Lock programming for a telephone
You need the programming template found at the front of this
guide. See "Getting started with Norstar" on page 1 for more
ƒ••¤flfl‹››
information.
¤‹fl›fl
1. Press
2. Press
≠
password).
3. Press
≠
internal number of the telephone you want to program.
'
4. Press
≠
5. Press
'
6. Press
7. Press
8. Use CHANGE to select one of the three options: None,
Partial and Full.
Using an auxiliary ringer
An auxiliary ringer is a separate device that has to be
connected to Norstar.
Turning the auxiliary ringer for a telephone on or off
You need the programming template found at the front of this
guide. See "Getting started with Norstar" on page 1 for more
ƒ••¤flfl‹››
information.
¤‹fl›fl
1. Press
2. Press
≠
password).
3. Press
P0881591 Issue 01
(the default System Coordinator
at Terminals&Sets and enter the
.
until the display reads Restrictions.
twice.
until the display reads Set lock.
(the default System Coordinator
at Terminals&Sets.
Using System features / 179
.
.
Modular ICS 4.0 System Coordinator Guide