Setting The Name - Nortel Modular ICS 4.0 Manual

Setting the name

This setting allows you to program the Hunt Group name, such
as SERVICE or SALES. The name can be up to seven
characters in length.
1. Place the programming overlay on any M7310 or M7324
ƒ••¤flfl‹››
telephone.
2. Press
‡¤‡fi°‡
The display shows Password:.
3. Press
'
Terminals&Sets.
4. Press
≠
prgrming.
≠
5. Press
6. Press
≠
7. Enter the Hunt Group number you want to program (1-30).
'
8. Press
9. Press
10. Press CHANGE.
'
11. Using the dialpad, enter the name of the Hunt Group.
®
12. Press
13. Press
P0881591 Issue 01
until the display shows System
. The display shows Hunt groups.
. The display shows Show group.
. The display shows Member DNs:.
. The display shows Name:.
'
to store the name.
to exit or
Programming Hunt Groups / 145
(SCPLUS). The display shows
to continue programming.
Modular ICS 4.0 System Coordinator Guide
(CONFIG).