Disconnecting One Party - Nortel Modular ICS 4.0 Manual

42 / Answering calls
3. Press the button where the first call is on hold to create a
conference.
Only the person who established the conference can process
the conference by using the procedures described in this
section.
Tip -
on a call. See "Turning Privacy on or off for a call" on page
49.

Disconnecting one party

You can disconnect one party from a conference and continue
talking to the other.
On an M7208, M7310 or M7324 telephone:
1. Press the line button of the call that you want to disconnect.
®
The call that you want to keep is automatically put on hold.
2. Press
3. Press the line button of the held call to speak to the
remaining person.
ƒ£‹
On an M7100 telephone:
˙
1. Press
®
hold.
˙
2. Press
3. Press
Modular ICS 4.0 System Coordinator Guide
You can create a conference by releasing privacy
. The call is disconnected.
, to place one caller on hold. Press
again, to put the caller you want to keep on
. The call is disconnected.
to speak to the remaining party.
P0881591 Issue 01