Nortel Modular ICS 4.0 Manual page 26

14 / Frequently used programming operations
In this example, you are changing the time to 1:30 p.m.
Hour:01
NEXT CHANGE
Hour:___
CANCL
AM
OK CHANGE
Hour:01
NEXT CHANGE
Minutes:00
NEXT CHANGE
Minutes:___
CANCL
If you are only changing the time and not the date, press
session.
In this example, you are changing the date to July 15, 1998.
Minutes:30
NEXT CHANGE
Year:97
NEXT CHANGE
Year:___
CANCL
Year:98
NEXT CHANGE
Modular ICS 4.0 System Coordinator Guide
Press CHANGE.
Press the dial pad buttons to enter the hour. Use two
digits for all hours. The clock on the display shows
either one or two digits.
The display prompts you to choose a.m. or p.m.
Press CHANGE and OK to select p.m.
Press NEXT.
Press CHANGE.
Press the dial pad buttons to enter the minutes.
Press NEXT.
Press CHANGE.
Press the dial pad buttons to enter the year.
Press NEXT.
®
to end your
P0881591 Issue 01