How Line Redirection Is Different From Call Forward; Using Line Redirection - Nortel Modular ICS 4.0 Manual

92 / Forwarding your calls
Displays while canceling redirection
Select line(s)
QUIT
Select line(s)
For other displays, see "Common feature displays" on page 203.

How Line Redirection is different from Call Forward

Call Forward forwards all calls that arrive at a particular
telephone to another telephone within the Norstar system. Line
Redirection redirects only the lines you specify, no matter
which telephones they appear on, to a telephone outside the
Norstar system. Line Redirection takes precedence over Call
Forward.

Using Line Redirection

You redirect lines at a telephone, but once redirected, the lines
are redirected for the entire system.
You can redirect only lines that appear at line buttons on your
telephone.
You can answer the telephone if it rings while you are in the
middle of programming Line Redirection, but none of the
Norstar call handling features are available until the feature
times out. If you need to use a Norstar feature to process the
ƒ
call, quit Line Redirection programming by pressing
are trying to process.
Modular ICS 4.0 System Coordinator Guide
Press the lines that are no longer to be
ALL
redirected. The lines light up as you press
them. Once you cancel redirection for a
line you cannot restore it by pressing the
line again. Press ALL to cancel redirection
for all your lines. When you are finished,
press
Continue to press the lines that are no
ALL OK longer to be redirected. Press
or OK when you are finished.
®
. Do not press
˙
or OK.
or you disconnect the call you
˙
P0881591 Issue 01