How Line Redirection Is Different From Call Forward - Nortel Enterprise Edge Feature Programming Telephone Manual

Select line out
QUIT
Select line(s)
QUIT ALL
Select line(s)
ALL
Unequipped line
Displays while canceling redirection
Select line(s)
QUIT ALL
Select line(s)
ALL
For other displays, see

How Line Redirection is different from Call Forward

Call Forward forwards all calls that arrive at a particular telephone to an internal or
external telephone. Line Redirection redirects only the lines you specify, no matter
which telephones they appear on, to a telephone outside the Enterprise Edge
system. Line Redirection takes precedence over Call Forward.
P0908510 Issue 01
Select the line that is used to redirect calls out of the
system.
Press the lines to be redirected. To undo a line
selection, press it again. Press
lines.
Continue to press the lines to be redirected. Press
or OK when you are finished.
˙
OK
The line you are attempting to redirect cannot be
redirected because the hardware does not support
redirection.
Press the lines that are no longer to be redirected. The
lines light up as you press them. Once you cancel
redirection for a line you cannot restore it by pressing
the line again. Press ALL
your lines. When you are finished, press
.
OK
Continue to press the lines that are no longer to be
redirected. Press
˙
OK
finished.
Common feature displays
Enterprise Edge Feature Programming Telephone Guide
Forwarding your calls 71
ALL to redirect all your
to cancel redirection for all
˙
or OK when you are
on page 149.
or