KVH Industries TracPhone FB250 Installation Manual page 97

Chapter 6: Service and repair
Mounting the GPS module
To mount the new GPS module, repeat the above procedure in reverse:
1. Fit the GPS module over the dedicated four threaded bushes on the
mounting plate above the HPA module.
2. Mount the four screws through the holes in the corners of the GPS module
and into the threaded bushes on the antenna. Fasten the screws with
torque 1.0 Nm using a torx screwdriver.
3. Reinsert the plug. Make sure the plug is fitted properly.
84 Replacing modules