KVH Industries TracPhone FB250 Installation Manual page 105

Chapter 7: Troubleshooting
7.2.3 Event messages
Display of event messages
The terminal can detect events during POST (Power On Self Test), PAST
(Person Activated Self Test) or CM (Continuous Monitoring). When the
terminal detects an event that requires your action, it issues an event
message.
When your terminal issues an
event message, the Terminal
indicator or the Antenna
indicator in the LED panel on
top of the terminal signals the
event, according to the tables
Terminal indicator and Antenna
indicator in the previous
section.
You can see the active event messages in the web interface by clicking the
warning symbol in the icon bar at the top in the web interface.
All events are logged in the event log. For information on the event log, see
Event log on page 93.
92 Status signaling