KVH Industries TracPhone FB250 Installation Manual page 52

Connect the foil to the hull by plenty of screws or hard–soldering. Run the foil
past the place where the short antenna cable is to be grounded and mount the
grounding kit on top of the foil.
For further grounding information read Appendix C Grounding and RF
protection on page 119.
2.6.2 Cable support systems
KVH Industries offers two cable support systems.
• The Basic cable support comes with the terminal as part of the delivery. It
is a simple system to which you can secure your cables using cable strips.
For information on how to mount the Basic cable support, see the next
section Mounting the Basic cable support.
• The Extended Cable support is longer than the Basic cable support, and
has connectors for the cables, providing a better ground connection. For
information on how to mount the Extended cable support, see Mounting
the Extended cable support on page 42.
Chapter 2: Installing the system
Installing the terminal 39