KVH Industries TracPhone FB250 Installation Manual page 26

Fleetbroadband
Hide thumbs Also See for TracPhone FB250:
Table of Contents

Advertisement

Radar
power
0 – 10 kW
0.4 m
30 kW
1.0 m
50 kW
2.0 m
The separation distance for C-band (4-8 GHz) radars should generally be the
same as for X-band radars.
Interference
Even at distances greater than "d min." in the previous section the radar
might still be able to degrade the performance of the TracPhone system.
The presence of one or more X-band radars within a radius up to 100 m could
cause a minor degradation of the signal-to-noise ratio during high speed and
data calls. The degradation will be most significant at high radar pulse
repetition rates.
As long as receiving conditions are favorable, this limited degradation is
without importance. However, if receiving conditions are poor – e.g. due to
objects blocking the signal path, heavy rainfall or icing, low satellite elevation
and violent ship movements – the small extra degradation due to the radar(s)
could cause poor call quality. A voice call might become noisy and perhaps fail
while a data connection might decrease in speed and performance.
S-band (~ 10 cm / 3 GHz) damage distance
TracPhone FB500
d min. at 15°
d min. at 60°
vertical
vertical
separation
separation
0.2 m
0.5 m
1.0 m
Placing the antenna
Chapter 2: Installing the system
TracPhone FB250
d min. at 30°
d min. at 75°
vertical
separation
0.4 m
0.2 m
1.0 m
0.5 m
2.0 m
1.0 m
vertical
separation
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tracphone fb500

Table of Contents