KVH Industries TracPhone FB250 Installation Manual page 57

Chapter 2: Installing the system
Terminal with Basic cable support
First mount the Basic cable support on the terminal as described in Mounting
the Basic cable support on page 40.
1. Mount the terminal with the Basic cable support on the bulkhead by
inserting four screws through the holes in the mounting bracket and into
the mounting surface.
2. Connect all cables.
Make sure that the grounding requirements are met. See Grounding and
RF protection on page 119.
3. Secure the cables to the cable support using cable strips.
Terminal with Extended cable support
First mount the Extended cable support on the terminal as described in
Mounting the Extended cable support on page 42.
1. Mount the Extended cable support with the terminal on the bulkhead by
inserting six screws through the holes in the Extended cable support and
into the mounting surface.
2. Connect the short cables between the terminal and the cable support.
3. Connect all other cables.
Make sure that the grounding requirements are met. See Grounding and
RF protection on page 119.
4. Secure the cables to the cable support using cable strips.
44 Installing the terminal