KVH Industries TracPhone FB250 Installation Manual page 37

Chapter 2: Installing the system
2.4.3 Important mounting notes
Line of sight
Place the antenna with free line of sight in all directions to ensure proper
reception of the satellite signal. Do not place the antenna close to large
objects that may block the signal.
Water intrusion
After having connected the antenna cable to the antenna - ensure that the
connector assembly is properly protected against seawater and corrosion. As a
minimum, use self-amalgamating rubber.
If possible, install the radome such that direct spray of sea water is avoided.
It is recommended not to use pneumatic tools for cleaning the radome,
specially at a short distance and directly at the split between top and bottom.
24 Installing the antenna