Nortel Server 1005r Maintenance And Diagnostics page 76

Monitoring multimedia hardware
State
Not Configured
Off Duty
Remote Off Duty
Remote (Yellow)
Alarm
Shutting Down
Uninitiated
Alert icons
If one of the following icons appears next to a component in the tree,
then the component or one of its subcomponents is experiencing a
problem:
Icon
76
Description
The device is not configured in CallPilot.
For example, a DSP is not being used because it was
not allocated in the Configuration Wizard.
The component has been stopped.
The component has been taken out of service at the
switch.
A red alarm exists at the receiving device. This alarm
is sent by the receiving T1 device to CallPilot, and it
remains in effect until the red alarm is cleared at the
receiving device.
The component is in the process of stopping.
This state occurs quickly and is immediately
followed by Off Duty.
The call processing component has not initialized the
resource.
Description
A problem exists with a subcomponent of the selected
component. Expand the tree to locate the subcomponent with the
problem.
A problem exists with the selected component.
Standard 1.10
CallPilot