Nortel Server 1005r Maintenance And Diagnostics page 102

Using CallPilot system utilities
Your 1005r server has either one or three MPB96 boards. Each MPB96
board has 12 DSP sections embedded on the board.
DS30X links
In the DS30X link pane, each DS30 row represents a separate DS30X
link (also referred to as a DS30 link). Each box in the row represents one
DS30X channel.
The DS30X links connect the CallPilot server to the MGate card in the
Meridian 1 switch or Succession 1000 system. The DS30X link to the
switch is supported by the connection of the server to the switch
backplane.
ATTENTION
System Info tab
Figure 14 on page 103 shows an example of the System Info tab.
102
You must connect the DS30X-1 cable to an MGate
card to receive the clock source for the MPB96 board.
Failure to connect the DS30X-1 cable to an MGate
card can result in noise interference on the remaining
voice channels.
Standard 1.10
CallPilot