Nortel Server 1005r Maintenance And Diagnostics page 176
Nortel networks network device maintenance and diagnostics
Hide thumbs
Also See for Server 1005r:
- Hardware installation (74 pages) ,
- User manual (144 pages) ,
- Upgrade manual (126 pages)
Table of Contents
Advertisement
Replacing or adding voice processing boards
3
Attach the ESD strap to your wrist and attach the other end to a
known grounded connection.
4
Remove the chassis cover. Refer to "Removing and replacing the
server cover" on page 108 for instructions.
5
Disconnect the red power cable from the PCI riser assembly.
6
Disconnect the DS30X cable from the MPB96 card in the full-size
side of the PCI riser. Mark the cable as number 1.
7
Disconnect the SCSI cable attached to the RAID card.
Figure 51: SCSI cable attached to RAID card
8
Lift the blue tabs and pull up on the riser to remove the riser card
assembly from the chassis.
176
Standard 1.10
CallPilot
Advertisement
Table of Contents
