Nortel Server 1005r Maintenance And Diagnostics page 57

June 2007
The netstat command
The netstat command displays current TCP/IP network connections and
protocol statistics.
Netstat command syntax
The netstat command uses the following syntax:
netstat [-a] [-e] [-n] [-s] [-p proto] [-r] [interval]
netstat command parameters
Table 9: netstat command parameters
Parameter
-a
-e
-n
-s
-p proto
-r
interval
1005r Server Maintenance and Diagnostics
Description
Displays all connections and listening ports.
Displays Ethernet statistics. This can be combined with
the -s option.
Displays addresses and port numbers in numeric form.
Displays statistics for each protocol.
Shows connections for the protocol specified by proto.
Proto can be tcp or udp. If used with the -s option, proto
can be tcp, udp, or ip.
Displays the contents of the routing table.
Redisplays selected statistics, pausing between each
display. Press Ctrl+C to stop redisplaying.
Using Windows online diagnostic tools
57