Nortel Server 1005r Maintenance And Diagnostics page 157
Nortel networks network device maintenance and diagnostics
Hide thumbs
Also See for Server 1005r:
- Hardware installation (74 pages) ,
- User manual (144 pages) ,
- Upgrade manual (126 pages)
Table of Contents
Advertisement
June 2007
Figure 39: PCI riser assembly power cord
14
Reconnect the DS30X cable or cables to the MPB96 card or cards.
You must reconnect each cable to the same MPB96 card it was
previously connected to. Use the labels you applied.
15
Hold the PCI riser assembly by the two blue handles (A) and push
the assembly into the server board. Refer to "PCI riser card
assembly" on page 155.
16
Line up the two grooves on the back lip of the PCI riser assembly
with the pins on the rear panel as shown in the following illustration.
ATTENTION
1005r Server Maintenance and Diagnostics
If the PCI riser assembly is not fully seated, the server can
malfunction.
RAID operations
157
Advertisement
Table of Contents
