Nortel Server 1005r Maintenance And Diagnostics page 116
Nortel networks network device maintenance and diagnostics
Hide thumbs
Also See for Server 1005r:
- Hardware installation (74 pages) ,
- User manual (144 pages) ,
- Upgrade manual (126 pages)
Table of Contents
Advertisement
Replacing basic chassis components
Figure 21: SCSI hard drive carrier
5
Pivot the latch (A) into the upright position.
6
Pull out on the black lever to slide the carrier from the chassis (B).
7
Remove the new hard drive from its wrapper and place it on an
antistatic surface.
8
With the drive circuit-side down, position the connector end of the
drive so that it is facing the rear of the drive carrier.
9
Align the holes in the drive to the holes in the drive carrier and
attach it to the carrier using four screws that meet the drive vendor's
recommendation.
116
Standard 1.10
CallPilot
Advertisement
Table of Contents
