Table of Contents
Advertisement
76 Patches
4
Enabling patch delivery for Regional Patch Selector (RPS) sites
If the RPS service is enabled, the System Manager sends information
about the software at the site to the RPS server, which sends an alarm
notification when updates are available.
Prerequisites
•
•
Procedure Steps
Step
1
2
3
Copyright © 2007-2008 Nortel Networks
.
Unix Path Location
/patches/MCP/MCP_11.0.0.1_2008-01-05-2156.patch
Using an FTP client, download the patch from the
gsds.ca.nortel.com site.
The user ID is gsduser and the password is 4U2get!n. The path
to the patch is the path returned by the Getpath web tool without
the /patches prefix.
Your site has been configured with the Nortel Regional Patch Selector
system.
Enabling RPS integration requires knowledge of the site name that has
been configured into the RPS system. The configured site name in the
Regional Patch Selector application must match the configured site
name in Nortel's Regional Patch Selector system.
Action
Launch the System Management console.
From the navigation menu, select Network Data and Mtc >
Regional Patch Selector.
The Regional Patch Selector window appears.
Select the Integrate with Regional Patch Selector (RPS) check
box and enter the Site Name using all caps.
Application Server 5300
Nortel AS 5300 Installation
NN42040-300 01.04
4 November 2008
--End--
Advertisement
Table of Contents
