Configuring Number Manipulation For Source Phone Numbers For Ip To Norstar Calls; Configuring The Number Manipulation Tables; Configuring Number Manipulation For Digit Delivery - Nortel VoIP Gateway Software Manual

Configuring the Number Manipulation tables

Configuring number manipulation for Digit Delivery

p51
Parameter
Prefix to add
Configuring number manipulation for Source Phone Numbers
for IP to Norstar calls
p54
Parameter
Prefix to add
Norstar VoIP Gateway Configuration Guide Addendum – Version 2.1
Description
Enter the number you want to add to the front of the stripped
destination number.
For example, if you enter 9 and the stripped destination phone
number is 1234, the new destination phone number is 91234.
The prefix can include digits and the following:
D = wait for dial tone.
You may use D as the first prefix digit so that the VoIP
Gateway will wait for a Norstar dial tone before dialing out
the digits. Dial tone detection can only be used as the first
digit.
P = pause
Pause inserts a 1.5 second wait period before proceeding
with the remaining digits. It can be used instead of D as the
first digit and may improve call setup time in that case. It
may also be used to wait for any secondary dial tone, such
as might be required for dialing out through the Norstar to
the PSTN. Longer periods may be achieved by using more
than one P character. For example, PP will insert a pause
of 3.0 seconds.
Note: Either D or P should be used at the beginning of the digit
string in order to ensure that the Norstar has enough time to be
ready to receive the digits. Without D or P, the first few digits
may not be reliably dialed.
Description
Enter the number you want to add to the front of the stripped
source number.
For example, if you enter 9 and the stripped destination phone
number is 1234, the new source phone number is 91234.
4