5
Installing RSA-II card firmware upgrades
Use this procedure to upgrade the firmware of the RSA-II card. Server
reboot is not required for this upgrade.
Prerequisites
•
•
Procedure Steps
Step
1
2
3
4
5
6
7
8
9
10
11
12
13
Copyright © 2007-2008 Nortel Networks
.
When the server reboot begins, remove the CD from the
CD-ROM drive.
You must have the CD containing the RSA-II card firmware upgrade file
(Platform firmware upgrade CD).
A PC is required to access RSA-II web interface and load firmware.
Action
Load the Platform firmware upgrade CD into the CD-ROM drive.
Start a Web browser and log on to the ASM Remote Control
(RSA-II card).
From the navigation menu, select Tasks > Firmware Update.
Browse to the directory where the update file is stored.
\\x3550\RSA
Select the paetbrus.pkt file and click Update.
When the file transfer completes, click Continue.
The RSA-II card Boot ROM firmware is applied.
From the navigation menu, select Firmware Update.
Browse to the directory where the update file is stored.
\\x3550\RSA
Select the paetmnus.pkt file and click Update.
When the file transfer completes, click Continue.
The RSA-II care Main Application firmware update is applied.
From the navigation menu, select Restart ASM.
Click Restart.
Click OK.
Application Server 5300
Nortel AS 5300 Installation
NN42040-300 01.04
4 November 2008
Installing the firmware upgrades 105
--End--
--End--