70 AS 5300 software deployment
Deploying the initial software load
Use this procedure to deploy the initial AS 5300 software load.
Prerequisites
•
Procedure Steps
Step
1
2
3
Deploying the initial software load job aid
Several files are required as parameters to execute the mcpInstall.pl script.
For more information about script parameters and their descriptions, see
Table 10 "Installation script parameter definitions" (page
Table 10
Installation script parameter definitions
File
tagsFile
importFile
licenseKeyFile
Copyright © 2007-2008 Nortel Networks
.
You must be assigned the AA role (ntappadm).
Action
Log on to the Element Management server as the AA role
(ntappadm).
Change directory:
cd /var/mcp/install
Deploy the system by issuing the following command:
./mcpInstall.pl -i <importFile> -t <tagsFile> -1
<licenseKeyFile>
The "Replication Process may take up to 45 minutes to
complete...Deploying DB" message appears.
Refer to
"Deploying the initial software load job aid" (page 70)
a description of these parameters.
Definition
Import tags file (StagingFedPBX*Server.tags) containing IP address/tag
and hostname/tag pairs. The file also contains sitename/tag value and
other tags. The install/upgrade scripts use the tagsFile to replace tags with
values in the given import XML file.
XML file (StagingFedPBX*Server.xml) containing server definitions,
Network Element instance definitions, start-up critical configuration data,
and default configuration data. This file is never manually modified by the
user.
The license key file to apply. This property (-l) is optional. The license key
may also be applied after the installation. If it is to be used, the license key
file should be copied to /var/mcp/install before running the script.
Application Server 5300
Nortel AS 5300 Installation
NN42040-300 01.04
4 November 2008
--End--
for
70).