Table of Contents
Advertisement
48 Platform software installation
Prerequisites
•
•
•
Procedure Steps
Step
1
2
If you are...
Installing an EMS1 server
Installing an EMS2 server
All other SIP core servers
3
4
5
6
Copyright © 2007-2008 Nortel Networks
.
You have completed the steps described in
networking, serial console redirection, and time zone settings" (page
45).
External time source IP address(es), if applicable.
Remote syslog server IP address, if applicable.
Action
During the Linux installation process, the system displays the
following prompt:
Please indicate the Clock Source function of this
server:
Select the clock source.
Configure the clock source.
For more information about configuring the clock source for
EMS1 and EMS2 servers, see .
For more information about configuring the clock source for all
other SIP core servers, see .
The system displays the following prompt:
Do you wish to configure a Syslog Server IP Address
(Y/N) [N]?
Do one of the following:
Select N to not configure the syslog server IP address.
OR
Select Y to configure the syslog server IP address. If you select
this option, enter the syslog server IP address.
The system displays the following prompt:
Do you wish to enable system audit? (Y/N) [N]?
Do one of the following:
Select N to not enable system audit.
OR
Application Server 5300
Nortel AS 5300 Installation
NN42040-300 01.04
4 November 2008
"Configuring the
Select...
Option 1
Option 2
Option 3
Advertisement
Table of Contents
