Enabling The Norstar Tsp Server - Nortel TAPI User Manual

Enabling the Norstar TSP server

The Norstar TSP server must be enabled before Norstar TSP clients can connect.
To enable the Norstar TSP server:
1. On the Server, click the Start button and then click Run.
The Run dialog box appears.
2. Enter TCMSETUP /s Domain\AdminAccnt password.
Note: In this step /s Domain\AdminAccnt password is used as an
example.
/s is a switch meaning Server.
Domain is the domain of which the TAPI server is a member.
AdminAccnt is the TAPI domain-account with local administrative
privileges.
Password is the password for the TAPI domain-account.
For example, tcmsetup /s CTI_MNTK\TAPI_ADMIN admin
3. Click the OK button.
A dialog box appears confirming that the Norstar TSP server has been
enabled.
4. Click the OK button.
Note: You can access a help screen for the TCMSETUP by entering TCMSETUP
with no parameters.
Disabling the Norstar TSP server
To disable the Norstar TSP server:
1. On the Server, click the Start button and then click Run.
The Run dialog box appears.
2. Enter TCMSETUP /S /D.
3. Click the OK button.
A dialog box appears confirming that the Norstar TSP server is disabled.
4. Click the OK button.
P0605043 Issue 01
Configuring Norstar TSP on the Windows NT 4.0 Server 15
Norstar TSP Server Configuration Guide