Table of Contents
Advertisement
Table 6
IBM x3550 hardware characteristics (cont'd.)
Item
Server identification
CPU
Memory
Disk
AC power
DC power
Remote management
Optical drive
Cooling
Networking
Serial
Rail kit
Mount the hardware
The AS 5300 server requires the Pizzaro rail kit for rack-mount
installations.
Mounting the server
Use this procedure to mount the physical server into a server rack.
Prerequisites
•
Procedure Steps
Step
1
2
Copyright © 2007-2008 Nortel Networks
.
Description
x3550, Model 7978 AC1
2 x Quad-Core Intel Xeon processor E5420, 2.5GHz, 12 MB L2 cache,
1333MHz FSB, 80w
8 GB PC2-5300 CL5 ECC DDR2 Chipkill FB DIMM 667MHz
2 x 73 GB 3.5-inch SAS, 15000 RPM, hot swap; RAID-1 mirrored using
IBM ServeRAID 8k-l SAS controller (hardware RAID-1)
2 x 670W A/C Power Supply (redundant, hot-swap); 2.8m, 100-240V,
C13 to IEC 320-C14 (WW) rack power cable
2 x 670W D/C Power Supply (redundant; hot swap); 2.8m, 100-240V,
C13 to IEC 320-C14 (WW) rack power cable
Remote Supervisor Adapter II (RSA-II) Slimline with external RJ-45
Ethernet port (internal PCI card)
DVD/CD-RW
Two fans per CPU, one fan per power supply
2 x 10/100/1000 Mbps
COM1, DB-9
Pizarro (Nortel-specified)
You require a Pizzaro rail kit for each IBM x3550 server being installed.
Action
Adjust the rail kit to fit in the frame. To properly support the
server, each rail must be mounted to the outside of the front and
rear of the frame.
Adjust the left and right rails by sliding the rear mounting bracket
to fit the frame.
Application Server 5300
Nortel AS 5300 Installation
NN42040-300 01.04
4 November 2008
Mount the hardware 23
Advertisement
Table of Contents
