Log Onto Web Management Interface - Digisol DG-SC2600 User Manual

DG-SC2600/DG-SC2600W User Manual

1.9 Log Onto Web Management Interface

Make sure the IP camera is correctly powered (Power LED is on), and then
launch Internet Explorer and type the IP address of the IP camera in address
bar of Internet Explorer. You should be prompted to input the user name and
password:
Default user name is 'admin' and password is '1234'. Click 'OK' to continue
after user name and password has been entered.
If you're rejected, maybe the password has been modified previously. This
should not happen if this is a newly-purchased camera. However, if the
camera has been used earlier, the password would have been changed.
Please try to obtain the correct user name / password, or else reset the
camera to default settings.
24