Selecting The Original Size - Sharp MX-M232D Operation Manual

COPY FUNCTIONS

SELECTING THE ORIGINAL SIZE

If you loaded a non-standard size* original or the original size was not correctly detected, set the original size manually.
Perform the following steps after placing the document in the document feeder tray or on the document glass.
* Standard sizes:
Note
The following sizes can be detected correctly: A3, B4, A4, A4R, A5 (11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x
11", 8-1/2" x 11"R, 5-1/2" x 8-1/2"). If a non-standard size original is placed (including special sizes), the closest
standard size may be displayed, or the original size may not appear.
1
Press the [SPECIAL FUNCTION] key.
ON LINE
DATA
SPECIAL
FUNCTION
LINE
COPY EXPOSURE PAPER SE
DATA
SCAN COLOUR MODE RESOLUT
The special function
screen will appear.
2
Select "ORIG. SIZE ENTER" from the
menu with the [ ] or [ ] key.
PQ
ED COPY
LEX SCAN
LEX SCAN
ACC
3
Press the [OK] key.
GHI
BACK
OK
PQRS
PY
AN
The original size selection
screen will appear.
4
Select the original size with the [ ] or
[ ] key.
The selected original size
is highlighted.
• To select an inch original size, press the [
go to step 6.
• If you selected "SIZE INPUT", follow steps 4 through 6
of the procedure in "USING THE BYPASS TRAY TO
COPY A SPECIAL SIZE ORIGINAL"
horizontal and vertical dimensions of the original.
35
SPECIAL FUNCTION
ID CARD COPY
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
SPECIAL FUNCTION
ID CARD COPY
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
ORIG. SIZE ENTER
AB
A3
B4
A4
ORIG. SIZE ENTER
AB
A3
B4
A4
] key and
(p.36) to set the
5
Press the [OK] key.
You will return to the base
OK
screen and the selected original
size will appear in the original
size display.
Selecting an inch original size
6
Select the original size with the [ ] or
[ ] key.
To return to selection of AB original sizes, press the
[ ] key to return to step 4.
7
Press the [OK] key.
You will return to the base
OK
screen and the selected original
size will appear in the original
size display.
To cancel an original size selection, press
Note
the [CA] key.
ORIG. SIZE ENTER
INCH
11x17
1
8 x14
2
8 x11 1
2