Selecting The Paper Tray For Copying; Copying - Sharp MX-M905 User Manual

Digital multifunction system

Hide thumbs Also See for MX-M905:

Table of Contents

COPIER►BEFORE USING THE MACHINE AS A COPIER

SELECTING THE PAPER TRAY FOR

The machine is set to automatically select a tray that has the same size of paper as the size of the placed original (Auto

Paper Select).

If the original size cannot be detected correctly because it is a non-standard size or when you want to change the paper

size for copying, you can select the paper tray manually.

If the selected tray runs out of paper during a copy job and there is another tray that has the same size and type of paper,

that tray will be automatically selected and the copy job will continue.

To change the initially selected tray:

In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Initial Status Settings] → [Paper Tray].

Tap the [Paper Select] key.

► COPYING SEQUENCE (page 2-7)

Tap the required tray key.

After the settings are completed, tap

In Easy mode

• When the bypass tray is selected, specify the paper type and size based on the paper loaded into the bypass tray.

► SPECIFYING A TYPE AND SIZE OF PAPER LOADED ON BYPASS TRAY (page 2-36)

• In normal mode, you can also open the [Paper Select] screen by tapping the machine image on the base screen.

To automatically select the tray, tap the [CA] key. When the [CA] key is tapped, all settings selected to that point are

cleared and you will return to the base screen.

Type and Size

In Normal mode

Paper Select

Change Current Type and

No. of copies

Size of Selected Tray

Change Size/Direction.

Large Capacity Tray

Enlarge/Reduce Copy

2-Sided Copy

Margin Shift

Shift Position to Have Margin

Type and Size

Chapters

Table of Contents