D-Link DS-3550 Command Line Interface Reference Manual page 40

delete snmp view
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a previously configured SNMP view from the switch:
show snmp view
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display SNMP view configuration:
DES-3550:4#show snmp view
Command: show snmp view
Vacm View Table Settings
View Name
--------------------
ReadView
WriteView
NotifyView
restricted
restricted
delete snmp view <view_name 32> [all | <oid>]
The delete snmp view command is used to remove an SNMP view
previously created on the switch.
<view_name 32> − An alphanumeric string of up to 32 characters
that identifies the SNMP view to be deleted.
all − Specifies that all of the SNMP views on the switch will be
deleted.
<oid> − The object ID that identifies an object tree (MIB tree) that
will be deleted from the switch.
Only administrator-level users can issue this command.
DES-3550:4#delete snmp view dlinkview all
Command: delete snmp view dlinkview all
Success.
DES-3550:4#
Used to display an SNMP view previously created on the switch.
show snmp view {<view_name 32>}
The show snmp view command displays an SNMP view previously
created on the switch in the VACM View Table Settings.
<view_name 32> − An alphanumeric string of up to 32 characters
that identifies the SNMP view that will be displayed.
None.
Subtree
-------------------------
1
1
1.3.6
1.3.6.1.2.1.1
1.3.6.1.2.1.11
32
View Type
----------
Included
Included
Included
Included
Included