D-Link DS-3550 Command Line Interface Reference Manual page 103

delete vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To remove the vlan "v1":
config vlan
Purpose
Syntax
Description
Parameters
DES-3550:4#create vlan v1 tag 2
Command: create vlan v1 tag 2
Success.
DES-3550:4#
Used to delete a previously configured VLAN on the switch.
delete vlan <vlan_name 32>
This command will delete a previously configured VLAN on the
switch.
<vlan_name 32> − The VLAN name of the VLAN you want to delete.
Only administrator-level users can issue this command.
DES-3550:4#delete vlan v1
Command: delete vlan v1
Success.
DES-3550:4#
Used to add additional ports to a previously configured VLAN.
config vlan <vlan_name 32> { [ add [ tagged | untagged |
forbidden ] | delete ] <portlist> | advertisement [ enable |
disable]}
This command allows you to add ports to the port list of a previously
configured VLAN. You can specify the additional ports as tagging,
untagging, or forbidden. The default is to assign the ports as
untagging.
<vlan_name 32> − The name of the VLAN you want to add ports to.
add − Specifies all of the ports on the switch.
tagged − Specifies the additional ports as tagged.
untagged − Specifies the additional ports as untagged.
forbidden − Specifies the additional ports as forbidden.
95