Table of Contents
Advertisement
disable telnet
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the Telnet protocol on the switch:
enable web
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable HTTP and configure port number:
DES-3550:4#enable telnet 23
Command: enable telnet 23
Success.
DES-3550:4#
Used to disable the Telnet protocol on the switch.
disable telnet
This command is used to disable the Telnet protocol on the switch.
None.
Only administrator-level users can issue this command.
DES-3550:4#disable telnet
Command: disable telnet
Success.
DES-3550:4#
Used to enable the HTTP-based management software on the
switch.
enable web <tcp_port_number 1-65535>
This command is used to enable the Web-based management
software on the switch. The user can specify the TCP port number
the switch will use to listen for Telnet requests.
<tcp_port_number> − The TCP port number. TCP ports are
numbered between 1 and 65535. The "well-known" port for the Web-
based management software is 80.
Only administrator-level users can issue this command.
17
Advertisement
Table of Contents
