Table of Contents
Advertisement
The switch history commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command
?
dir
config
command_history
show
command_history
Each command is listed, in detail, in the following sections.
?
Purpose
Syntax
Description
Parameters
Restrictions
Example usage
To display all of the commands in the CLI:
DES-3550:4#?
..
?
clear
clear arptable
clear counters
clear fdb
clear log
clear port_security_entry port
config 802.1p default_priority
config 802.1p user_priority
config 802.1x auth_mode
config 802.1x auth_parameter ports
config 802.1x auth_protocol
config 802.1x capability ports
config 802.1x init
Parameters
<value 1-40>
Used to display all commands in the Command Line Interface (CLI).
?
This command will display all of the commands available through the
Command Line Interface (CLI).
None.
None.
198
C
H
OMMAND
29
L
ISTORY
IST
Advertisement
Table of Contents
